Allied Telesis FS200 Series Ficha de datos
Navegue en línea o descargue pdf Ficha de datos para Interruptor Allied Telesis FS200 Series. Allied Telesis FS200 Series 2 páginas. Fs200 series 2 port fast ethernet speed/media converting switch
Imprimir página
Datasheet |
Switches
FS200 Series
2 Port Fast Ethernet Speed/Media Converting Switch
AT -FS201-xx
2 port Fast Ethernet switch,
10/100TX to 100FX (ST), 2km
AT -FS202-xx
2 port Fast Ethernet switch,
10/100TX to 100FX (SC), 2km
AT -FS232-xx
2 port Fast Ethernet switch media converter
10/100TX to 100FX (SC), 2km
AT -FS232/1-xx
2 port Fast Ethernet switch media converter
10/100TX to 100FX (SC), 15km
AT -FS232/2-xx
2 port Fast Ethernet switch media converter
10/100TX to 100FX (SC), 40km
Extend Networks
The FS200 series switches are the ideal solution
when the time comes to upgrade your
traditional 10Mbps Ethernet network or extend
your 100Mbps Fast Ethernet network.The
FS200 series is designed to extend the distance
of your network by converting Fast Ethernet
data between twisted pair cabling and single-
mode fiber-optic cabling.The FS200 features a
100FX fiber-port and a 10/100TX twisted-pair
port.The fiber-optic port features an SC
connector and an operating distance of 2
kilometers (6,561 feet) to 40 kilometers (24.9
miles) depending on the model.The twisted-pair
port has an RJ-45 connector with a maximum
operating distance of 100 meters (328 feet).
VLAN Support
Many new backbone switch products now
support the industry standard IEEE 802.1Q
specification for Virtual LANs (VLANs) that
send extra-long data packets on the
network.The FS200 switches are fully
compatible with these long packets, enabling
them to be used in modern networks. Switches
not supporting this feature will discard these
extra long packets, making them unsuitable for
modern networks.
Allied Telesis
Small and Flexible
The small size and external power supply of the
FS200 series allows them to be used almost
anywhere. Additionally, they can be mounted in
a chassis along with Allied Telesis' media
converters, allowing users to construct any mix
of network conversions when they add the
optional redundant power supply.
MissingLink
TM
and Smart
MissingLink
TM
(SML)
The MissingLink feature allows the ports on the
media converter to pass the Link status of their
connections to each other. When the media
converter detects a problem with a port - such
as the loss of connection to a node - it shuts
down the connection to the other port, thereby
notifying the node that the connection has been
lost.The Smart MissingLink (SML) feature
monitors network connections and provides
notification when network segments fails,
allowing network managers to quickly identify
the source and location of failed segments and
minimize downtime.
Key Features
•
EnergyStar power adapters save customers a
minimum of 20% power consumption*
•
Convert speed as well as media type
•
Auto MDI/MDI-X
•
MissingLink (ML) (AT-FS232 only)
•
Smart MissingLink (SML) (AT-FS232 only)
•
Supports 1532 bytes frame
•
Support for multi-mode and single-mode fiber
•
Supports half and full-duplex operation
•
2k MAC address tables
•
Store-and-forward switching mode
•
Transparent to IEEE 802.1Q packets
•
Standalone or rack-mountable
•
Rack-mountable using optional AT-MCR12,
AT-TRAY4, or AT-TRAY1 chassis
•
Wall-mountable using AT-WLMT
* Compared to previous models
www.alliedtelesis.com