CPI Talos T700 Manual de instalación - Página 4
Navegue en línea o descargue pdf Manual de instalación para Validador de billetes CPI Talos T700. CPI Talos T700 4 páginas.
Troubleshooting
These are some common, easy-to-solve issues that may pop up during installation:
Cleaning
The Talos bill validator will not need to be cleaned as often as magnetic sensing bill acceptors. If cleaning is required, use a soft cloth moistened with a mild, non-
abrasive detergent.
Compliance
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (a) This device may not cause harmful interference, and (b) this device must accept any interference
received, including interference that may cause undesired operation.
Except as permitted under the relevant local legislation, no part of this publication may be copied, transmitted, transcribed, or distributed in any form or by any means, or stored in a database or retrieval system,
or translated in any language (natural or computer), without the prior written permission of CPI.
CPI reserves the right to change the product or the product specifications at any time. While every effort has been made to ensure that the information in this publication is accurate, CPI disclaims any liability for
any direct or indirect losses (howsoever caused) arising out of use or reliance on this information. This document does not necessarily imply product availability. Note: Your product may differ slightly from some
of the illustrations in this document.
CPI Corporate Headquarters
3222 Phoenixville Pike
Suite 200
Malvern, PA 19355
CranePI.com
Talos Install Guide_Web_5.24.19.indd 4
If this happens
Try
Check Harnesses: Cables may be
loose, not properly connected or pins
may be bent
The unit will not power
up
Check Source Voltage: Ensure that
power is being supplied to the bill
validator.
Ensure the unit has been enabled, then
check:
The unit has power, but
• Vending Machine Controller
will not accept a bill
• Coin manager and coin levels
• Inventory levels
• The door is locked properly
5/24/2019 9:57:14 AM