DG FPGA Configurar - Página 5

Navegue en línea o descargue pdf Configurar para Hardware informático DG FPGA. DG FPGA 10 páginas.
También para DG FPGA: Configurar (5 páginas), Configurar (14 páginas), Configurar (20 páginas), Configurar (8 páginas), Configurar (18 páginas)

Imprimir página

dg_ftp10g_server_fpgasetup_en.doc

3) Setup and connect NVMe SSD to PCIe adapter board.

For KCU105, connect to AB18-PCIeX16 and AB16-PCIeXOVR.

a) Confirm that two mini jumpers are inserted at J5 connector on AB18.

b) Connect ATX power supply to AB board.

c) Connect PCIe connector on FPGA board to FPGA Side (A-side) and connect NVMe

PCIe SSD to device side (B-Side) on AB board, as shown in Figure 2-3.

Caution: Please confirm that the SSD is inserted in the correct side of AB18

(B-side, not A-side) before power on system

22-Jul-20

AB18 PCIeX16

FPGA side on AB18 (A-side)

FPGA Board

Device side on AB18 (B-side)

NVMe SSD

Figure 2-3 Connect AB18-PCIeX16 to KCU105

ATX power supply

Two jumpers are inserted

RESET SW

Page 5