CPI GRYPHON Manual de instalación - Página 3
Navegue en línea o descargue pdf Manual de instalación para Contadoras y clasificadoras de monedas CPI GRYPHON. CPI GRYPHON 4 páginas. Coin changer
También para CPI GRYPHON: Manual del técnico (5 páginas)
Imprimir página
Audit
Press ≡ twice quickly (with the cassette in) to display audit information. Each section will display for three seconds before showing the amount of
change in each tube.
par
Par to Level: Sets the fill level for each coin. Coins above that level are sent to the cash-box.
Par to Value: Sets the fill level to a total cassette value. Once the value is achieved, coins are sent to the cash-box. Gryphon dynamically
alters the individual coin levels to minimize the need for manual refills.
Auto Par: Gryphon determines the optimal Par Level for your machine based on actual coin usage.
Initial power up
The coin manager will power up and check how many coins are in each tube. If the tubes are low, Gryphon will tell you which tubes to fill. You should fill all tubes
with a minimum of three coins per tube.
Cassette Configuration
It's easy to customize Gryphon's cassette. Use one of the many stock configurations or create your own. There are two methods to configure the
cassette. Please note: The cassette must be empty before proceeding.
Cassette Code
If you are changing the full cassette, press ≡, CASSETTE, then:
1. Enter the code located on the front of the cassette (e.g. AAB)
2. Press SAVE - if the code is not recognized, follow the Custom Cassette steps below
3. When prompted, press START to calibrate
Creating Custom Cassette
Follow these steps if the code is not recognized or to change individual tubes. Press ≡, CASSETTE, then:
1. Select CUSTOM
2. Use the MMI to choose the tube (A-F) you'd like to edit
3. Scroll through the coin list and select your coin
4. Press SAVE to program the tube
5. When all tubes have been programmed, press ≡
6. When prompted, press START to calibrate
status lights
The three status lights to the left of the ≡ key are used to quickly identify Gryphon's status.
Color
Message
Green
The unit is functioning properly
The unit requires adjustment, see the
Yellow
MMI for instructions
The unit requires maintenance and
Red
should be returned to a service center