DG Flugzeugbau LS10-st Manual de vuelo - Página 12
Navegue en línea o descargue pdf Manual de vuelo para Aviones DG Flugzeugbau LS10-st. DG Flugzeugbau LS10-st 15 páginas.
Imprimir página7.1 Introduction
Section 7 describes the operation of the sailplane including its systems.
M.M. = Maintenance manual
Refer to section 9 "Supplements" for details of optional systems and
equipment.
7.2 Airframe
The LS10-s is a single-seater high performance glider.
The LS10-st is a self-sustainer single-seater high performance motorglider
with retractable powerplant.
18 m wingspan with wing parting at y=7 m, wingtips for 15m span optional.
Construction
Wings
Flaperons
Rudder
Horizontal stabilizer
Elevator
Fuselage
Canopy
Large single piece canopy, hinged at the front (nose) and supported by a gas
strut. Canopy is made of Plexiglas GS clear "GS 241" or optionally green "GS
green 2942" or optionally blue "GS blue 2928".
Canopy glass glued onto a GFRP frame
Tailplane
T-Tail with conventional stabilizer-elevator and spring trim.
Colours
Airframe:
registration numbers: grey RAL 7001
Anti collision paint
Approved colours: red, fluorescent red or orange
Approved areas:
1. Rudder: may be painted completely
2. Horizontal tail: paint only the stabilizer and only up to 200 mm from the
tips
3. Wing Sections: the inner wing shall not be painted
4. 15 m tips: can be painted entirely
5. 18 m wing tips: paint only the wing and not the ailerons, no more than 400
mm from the tips
Note: 3M mirror foil may be applied to all parts of the airframe
Issued: December 2011
Flight Manual LS10-s,-st
CFRP-foam-sandwich-shell with
CFRP-roving spar caps
CFRP-foam-sandwich-shell
GFRP-foam sandwich-shell
GFRP/ AFRP-foam sandwich-shell
AFRP -skin
CFRP-GFRP-shell
white
blue RAL 5012
TN LS10-02
or
red
RAL 3020
or green RAL 6001
7.2