CPR SR3 Manual - Página 3

Navegue en línea o descargue pdf Manual para Acuarios CPR SR3. CPR SR3 4 páginas. With accela pump

REMOVAL AND CLEANING OF YOUR POWERHEADS

1) Slide the powerhead out of the inlet of the SR3 protein skimmer.

2) Remove the air line by pulling away from the powerhead.

3) Remove the base plate by lining up the flat portion to the locking guide. Pull the base plate straight away

from the powerhead as the impeller may be attached to it.

4) Wash all parts under warm tap water. Do not use any detergents. Make sure that the air nipple and the

air line is clear of any foreign matter, calcium buildup or salt creep before reassembling.

5) Reassemble the powerheads and place them back on your SR3 protein skimmer.

SR3