Avsl QU4 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Sistema de micrófono Avsl QU4. Avsl QU4 6 páginas. Quad uhf wireless system

Control Layout

Setting Up

Insert the supplied AA batteries into the handheld or beltpack transmitters by carefully unscrewing

the base or flipping forward the front cover to reveal the battery compartment inside the transmitter

body, connect the batteries (ensure + and - are the correct way round for each cell) and carefully

replace the cover. Connect neckband microphones to the relative beltpack transmitters by connecting

and screwing in the 3.5mm jack plug fully.

Screw on the front-mounted TNC antennae and position the receiver within the best available line of

sight to the transmitter(s). Connect the DC jack of the supplied power adapter to the receiver and

the plug top to the mains outlet. Turn microphone level(s) down on the receiver.

A choice of mixed output of all 4 microphones on 6.3mm jack or individual balanced XLR outputs is

available on the rear panel of the receiver. Connect jack or XLR (optional) leads to the relative output

connector(s), turn down the volume of any equipment (mixer, amplifier etc.) that the signal will be

fed into and then connect the jack or XLRs to the equipment.

Warning! - take care not to point microphones towards speakers – this can cause damaging feedback

(loud whistle or howling noise) – try to point microphones away from the speaker cabinets.

1. Antenna connection (TNC)

2. Power switch

3. Power indicator

4. RF indicator

5. AF indicator

6. VOLUME control

7. On indicator

8. Off – Mute – On switch

9. Battery compartment

10. Gain control

11. Antenna

12. 3.5mm threaded jack socket

171.840, 171.841, 171.842 User Manual