DGP DGP-M2 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Amoladora DGP DGP-M2. DGP DGP-M2 16 páginas. Tungsten grinder

ELECTRODE CUTTING ASSEMBLY (continued)

Operating Instructions

1. Locate the adjustable Cutoff Indexer Block (A), which is the black anodized block mounted on the Ruler Support

Bar (C). Make sure the Cutoff Indexer Handle (F) is positioned so that it is in contact with the steel Ruler (G).

2. The exciting feature of the Cutoff Indexer System is the ability to change between different lengths quickly and

accurately. To locate the Cutoff Indexer Block (A), loosen Thumb Screw (B) and position the Cutoff Indexer Block

(A) to achieve the required length then finger tighten the Thumb Screw (B).

3. With your length chosen and the power off, insert the electrode tip first, into and through (right to left) the

appropriate sized hole on the Cut-Off Fork (D) until tip gently touches the right side of the Cutoff Indexer Handle (F).

4. Tighten the associated setscrew (E) on the Cut-Off Fork (D) with the provided hex screwdriver to hold the electrode

securely. Then turn on the power.

5. Pivot the cutting assembly up and towards the diamond cutting wheel and gently push the electrode shaft into the

cutting wheel. For larger electrode sizes, please be especially patient.

6. Return the cutting assembly to the level position before removing the electrode.

Figure 3: Electrode Cutting Assembly

Figure 4: Electrode Cutting Assembly

Viewed from the left

Viewed from the right

Consult Illustrated Parts Lists on the following pages

and

See Page 13 for optional Accessories and Consumables Parts List

Page 8

Document: DGP-M2 User Manual

Rev: B

02/03/2022