Avtech AVT1104TP Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad Avtech AVT1104TP. Avtech AVT1104TP 8 páginas. Ir dome camera
Imprimir página
MENU
DAY / NIGHT
MODE
D TO N
N TO D
DELAY TIME
AWB
MODE
AE
MODE
(automatic
exposure)
BRIGHT
SHUTTER
DESCRIPTION
EXT
Use the external light sensor we added in the camera to detect the
surrounding light condition and switch to color or B/W mode.
If you're not satisfying with the mode switch time, you can go to D
TO N / N TO D to manually adjust the sensitivity.
COLOR
Always keep the day and night mode to day mode.
B&W
Always keep the day and night mode to night mode.
AUTO
No function.
Set the sensitivity for the day & night mode from day to night.
1 ~ 63
The higher the value, the more sensitivity the mode is switched when
the light condition is changed.
Note: This function is not available when AUTO and COLOR is
Set the sensitivity for the day & night mode from night to day.
1 ~ 63
The higher the value, the more sensitivity the mode is switched when
the light condition is changed.
Note: This function is not available when AUTO and COLOR is selected.
Set the delay time in second after which the day and night switch is
1 ~ 60
made.
This is used for the environment where the light condition may
change suddenly and usually last for a short time, for example, the
entrance of a parking lot. It may cause the day & night mode
switching constantly and damage the camera.
With this function, the camera will delay the mode switch at night
since the light change is temporary and unnecessary to pay
attention.
Automatically adjust the white balance based on the surrounding
AUTO
environment.
Manually adjust the white balance parameters.
USER
Choose USER, and click
modify R / G / B gain parameters.
(PUSH)
It's used for the environment surrounded largely by a particular
color, such as blue, causing color confusion. Aim the camera to a
white place, and select (PUSH) to memory this white. Then, aim
the camera to where it's supposed to face.
HOLD
It's used to force the camera memorizing the current white balance
setting and remain the same even when the environment is
changed.
8000K / 6000K /
Switch to the suitable color temperature based on the current
4200K / 3200K
environment to get the right color.
8000K = Shade; 6000K = Cloud; 4200K = White fluorescent; 3200K
= Halogen light bulb.
R-G GAIN
Adjust the red-green value from 1 ~ 255.
B-G GAIN
Adjust the blue-green value from 1 ~ 255
ESC
Not available for this model.
HOLD
Not available for this model.
DC
Not available for this model.
Set the level of brightness to adjust the brightness of the image.
0 ~ 255
The more the value, the brighter the image.
Automatically adjust the shutter speed for exposure based on the
AUTO
current environment.
selected.
(ENTER) to enter the USER MODE to