Avtech DG104A Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad Avtech DG104A. Avtech DG104A 4 páginas. Hd cctv total solution

Imprimir página

CONNECTION

1. DC12V Input Terminal

Connect the power terminal of the camera to a DC 12V regulated power supply.

NOTE: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power

tolerance of this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this

unit.

2. Video Output Connector (VIDEO OUT)

Connect the camera video output to the video input of a DVR with 75Ω coaxial cable.

NOTE: To ensure the camera has sufficient protection against moisture, an extra waterproof

measure, such as by using an insulating tape, must be used to cover the power and video

connectors after connection.

CAMERA PARAMETERS

This camera series has its own configuration menu, and either of the two methods below is available to

access the menu based on the camera model you have.

NOTE: The methods below are available only when the camera is used with our brand's HD CCTV

DVR.

Method 1



On the DVR live view, click the channel which connects this camera to display in the full screen mode,

and select

to show the control panel, and select

Method 2



On the DVR live view, right click to show the DVR main menu, and select "ADVANCED CONFIG" 

"DCCS". Then, select the channel which connects this camera, and click "SETUP" to enter the menu of

camera parameters.

ADVANCED CONFIG

CAMERA

DETECTION

ALERT

NETWORK

DISPLAY

RECORD

DEVICES

DCCS

NOTIFY

EXIT

NOTE: The parameters available depend on the model you have.

CH1

CH2

CH3

CH4

SETUP

DEVICE

XXXXX

CONNECTION

to enter the camera menu.