Allied Telesis x900 Series Manual de instalación - Página 5
Navegue en línea o descargue pdf Manual de instalación para Enrutador de red Allied Telesis x900 Series. Allied Telesis x900 Series 13 páginas. Removable power supply and fan
También para Allied Telesis x900 Series: Cómo configurar (9 páginas)
Imprimir página
The following items are included with PSUs purchased separately:
■
one AC power cord (AC model)
■
one power cord retaining clip (AC model)
■
one Installation Guide
■
one warranty card
The following items are included with each FOM purchased separately:
■
one Installation Guide
■
one warranty card
Installing a Power Supply Unit
Warning All AC and DC versions of this equipment must be earthed.
Do not install an AC PSU and a DC PSU in the same switch chassis.
If you remove a PSU or FOM from the switch, immediately replace it or cover
the bay with a blanking panel. This prevents dust and debris from entering the
chassis and maintains proper airflow in the switch.
AC power supply unit specifications
Important information for service personnel:
■
CAUTION: double pole/neutral fusing
■
the rating of fuses FH101 and FH102 is 250 V, 5 A (AT-PWR01 only)
DC supply cable and power supply specifications
■
three-core cable is required
■
minimum core size: 3.3 mm
■
minimum cable rating: 600 V, 90 degrees Celsius
DC power supply specifications
■
40 to 60 V, 48 V nominal
■
supports either positive grounded or negative grounded operation
■
a 15 Amp certified/listed circuit breaker is required for circuit protection
2
(12 AWG) high strand count copper wire
Installation Guide
5