Dell 5530 Mono Laser Manual de servicio - Página 22
Navegue en línea o descargue pdf Manual de servicio para Portátil Dell 5530 Mono Laser. Dell 5530 Mono Laser 46 páginas. Loading paper and specialty media
También para Dell 5530 Mono Laser: Manual de consulta rápida (2 páginas), Manual de instalación y especificaciones (29 páginas), Configuración y especificaciones (29 páginas)
Imprimir página
a
Remove the captive screw to release the bracket that secures the WLAN card to the computer [1] and lift the bracket away
from the computer [2].
b Disconnect the antenna cables from the WLAN card [3].
c
Slide and remove the WLAN card from its connector on the board [4].
Installing the WLAN Card
1
Align the notch on the WLAN card with the tab on the WLAN-card connector on the system board.
2
Align the bracket which secures the WLAN card to the palmrest assembly.
3
Connect the antenna cables to the WLAN card.
CAUTION:
To avoid damage to the WLAN card, do not place any cables under it.
NOTE:
The color of the antenna cables is visible near the tip of the cables. The antenna-cable color scheme for the WLAN
card supported by your computer is as follows:
Table 2. Antenna-Cable Color Scheme for the WLAN Card
Connectors on the WLAN card
Main (white triangle)
Auxiliary (black triangle)
Multiple input, multiple output (grey triangle)
4
Tighten the captive screw to secure the bracket and the WLAN card to the palmrest assembly.
5
Install the:
a
Battery
b
Base cover
6
Follow the procedures in
22
Disassembly and reassembly
After Working Inside Your Computer
Antenna-cable color
white
black
Grey (optional)