Dell E5400 - Latitude - Core 2 Duo 2.4 GHz Sustitución de la placa del sistema - Página 3

Navegue en línea o descargue pdf Sustitución de la placa del sistema para Portátil Dell E5400 - Latitude - Core 2 Duo 2.4 GHz. Dell E5400 - Latitude - Core 2 Duo 2.4 GHz 4 páginas. Latitude ultrabook series; e-family series; mobile precision series
También para Dell E5400 - Latitude - Core 2 Duo 2.4 GHz: Manual práctico (38 páginas), Manual del producto (39 páginas), Especificaciones (2 páginas), Información sobre configuración y características (10 páginas), Manual práctico (32 páginas), Manual práctico (34 páginas), Manual práctico (46 páginas), Manual (46 páginas), Manual de servicio (43 páginas), Manual práctico (46 páginas)

Programming the Service Tag

After replacing the system board for Latitude E5400, E5500, and Dell Precision

M6400 Mobile Workstations, you need to program the service tag if the following

message is displayed on startup:

WARNING: The Service Tag has not been programmed.

This system will not function properly without a

Service Tag.

The setup utility will launch the Service Tag

installer.

NOTE:

Latitude and Dell Precision E-Series Workstation computers configured

with iAMT

receive this message only after the iAMT initialization procedures

are completed.

NOTE:

The battery light on the computer flashes blue and amber during this error.

To program the Service Tag:

1 Press <F2> to enter the system setup program.

2 Enter the correct Service Tag.

3 Perform one of the following steps:

•

If the AC Adapter is already connected, exit the system setup program and

reboot the computer.

•

If the AC Adapter is not connected, turn the computer off, connect the

AC adapter, and then turn the computer back on.