Dell Inspiron 1011 Manual de servicio - Página 4

Navegue en línea o descargue pdf Manual de servicio para Portátil Dell Inspiron 1011. Dell Inspiron 1011 43 páginas. Service manual
También para Dell Inspiron 1011: Manual de servicio (43 páginas)

Imprimir página
Dell Inspiron 1011 Manual de servicio
Back to Contents Page
  Power/Battery Status Light Board
Dell™ Inspiron™ 1011 Service Manual 
  Removing the Power/Battery Status Light Board
  Replacing the Power/Battery Status Light Board
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
is not covered by your warranty.
 
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
 Removing the Power/Battery Status Light Board
 
1. Follow the instructions in
Before You
 
2. Remove the battery (see
Removing the
 
3. Remove the keyboard (see
 
4. Remove the palm rest (see
 
5. Remove the hard drive (see
 
6. Remove the palm rest bracket (see
 
7. Disconnect the power/battery status light board cable from the system board connector, if you have not already done so while removing the palm rest
bracket.
 
8. Lift the power/battery status light board off the computer base.
1 power/battery status light board
3 power/battery status light board cable
connector
 Replacing the Power/Battery Status Light Board
 
1. Align the holes on the power/battery status light board to the protrusion on the computer base and keep it in place.
 
2. Connect the power/battery status light board cable to the system board connector.
 
3. Replace the palm rest bracket (see
 
Begin.
Battery).
Removing the
Keyboard).
Removing the Palm
Rest).
Removing the Hard
Drive).
Removing the Palm Rest
Bracket).
2 power/battery status light
board cable
 
 
Replacing the Palm Rest
Bracket).
Removing the
Battery) before working inside the