Dell Inspiron 1090 Manual de servicio - Página 36
Navegue en línea o descargue pdf Manual de servicio para Portátil Dell Inspiron 1090. Dell Inspiron 1090 47 páginas.
También para Dell Inspiron 1090: Manual de servicio (47 páginas)
Imprimir página
CAUTION:
When the Mini-Card is not in the computer, store it in protective antistatic packaging. For more information, see "Protecting Against
Electrostatic Discharge" in the safety information that shipped with your computer.
Replacing the Mini-Card(s)
1. Follow the instructions in
Before You
2. Remove the new Mini-Card(s) from its packaging.
CAUTION:
Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.
CAUTION:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system
board, and realign the card.
CAUTION:
To avoid damage to the Mini-Card, never place cables under the card.
3. Insert the Mini-Card connector at a 45-degree angle into the system-board connector.
4. Press the other end of the Mini-Card down into the slot on the system board and replace the screw that secures the Mini-Card to the system board.
5. Connect the appropriate antenna cables to the Mini-Card you are installing. The following table provides the antenna cable color scheme for the Mini-
Cards supported by your computer.
Connectors on the Mini-Card
WLAN (2 antenna cables)
Main WLAN (white triangle)
Auxiliary WLAN (black triangle)
WWAN (1 antenna cable)
Auxiliary WWAN (black triangle)
6. Replace the battery (see
Replacing the
7. Replace the palm-rest assembly (see
8. Replace the keyboard (see
9. Replace the label door (see
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
10. Install the drivers and utilities for your computer, as required.
Begin.
Antenna Cable Color Scheme
white
black
black with gray stripe
Battery).
Replacing the Palm-Rest
Removing the
Keyboard).
Replacing the Label
Door).
Assembly).