Dell Inspiron 1100 Manual de servicio - Página 29

Navegue en línea o descargue pdf Manual de servicio para Portátil Dell Inspiron 1100. Dell Inspiron 1100 40 páginas.

20. Lift the front of the system board out and away from the base plastics.

Installing the System Board

1. Insert the video connector on the replacement system board through the back of the base plastics.

2. Replace the two hex nuts that secure the video connector to the base plastics.

3. Replace the two M2.5 x 5-mm screws that secure the left antenna, which is located between the hard drive and optical drive cages, to the system

board (Inspiron™ 5100 and 5150 only).

4. Replace the two M2.5 x 5-mm screws that secure the optical drive cage to the system board.

5. Replace the three M2.5 x 5-mm screws that secure the hard drive cage to the system board.

6. Replace the battery bay shield, and reinstall the two M2.5 x 5-mm screws that secure the shield to the system board.

7. Replace the speakers.

8. Replace the microprocessor.

NOTICE:

Squeeze all of the contents of the thermal grease packet (provided with the kit) on to the microprocessor thermal-cooling assembly.

9. Replace the

10. Replace the

11. Replace the

12. Replace the

13. Replace the keyboard.

14. Replace the

15. Replace the

16. Replace the

17. Insert the battery into the battery bay.

18. Connect the AC adapter to the computer and to an electrical outlet.

NOTICE:

damage to the computer.

NOTE:

After replacing the system board, enter the computer Service Tag sequence into the BIOS of the replacement system board.

19. Turn on the computer.

20. Insert the CD that accompanied the replacement system board into the appropriate drive, and turn on the computer. Follow the instructions on the

screen.

Back to Contents Page

Great user manuals database on

Before you replace the microprocessor thermal-cooling assembly, wipe the thermal grease off of the assembly with a clean paper towel.

microprocessor thermal-cooling

assembly.

palm

rest.

video card

and

EMI shield

that you removed from the old system board.

display

assembly.

Mini PCI

card, modem, and

memory module(s)

CD or DVD

drive.

hard

drive.

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in

UserManuals.info

that you removed from the old system board.