Dell Inspiron 1320 Manual de servicio - Página 14
Navegue en línea o descargue pdf Manual de servicio para Portátil Dell Inspiron 1320. Dell Inspiron 1320 46 páginas. Dell inspiron inspiron 13: specifications
También para Dell Inspiron 1320: Manual de configuración y funciones (12 páginas), Ficha de datos de seguridad del producto (6 páginas)
Imprimir página
Back to Contents Page
Processor
Dell™ Inspiron™ 1320 Service Manual
Removing the Processor
Replacing the Processor
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
CAUTION:
To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press
to apply slight pressure to the center of the processor while turning the cam screw.
CAUTION:
To avoid damage to the processor, hold the screwdriver such that it is perpendicular to the processor when turning the cam screw.
Removing the Processor
1. Follow the instructions in
Before You
2. Remove the processor heat sink assembly (see
CAUTION:
When removing the processor, pull it straight up. Be careful not to bend the pins on the processor.
CAUTION:
To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press
to apply slight pressure to the center of the processor while turning the cam screw.
3. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
1
processor
3
ZIF-socket cam screw
CAUTION:
To ensure maximum cooling for the processor, do not touch the heat transfer areas on the processor thermal-cooling assembly. The
oils in your skin can reduce the heat transfer capability of the thermal pads.
CAUTION:
When removing the processor module, pull the module straight up. Be careful not to bend the pins on the processor module.
Begin.
Removing the Processor Heat Sink
2
ZIF socket
Removing the
Battery) before working inside the
Assembly).