Dell Inspiron 1410 Manual de servicio - Página 11

Navegue en línea o descargue pdf Manual de servicio para Portátil Dell Inspiron 1410. Dell Inspiron 1410 36 páginas.

1. Align the pin-1 corner of the processor so that it points to the triangle on the ZIF socket, and insert the processor into the ZIF socket.

When the processor is correctly seated, all four corners are aligned at the same height. If one or more corners of the processor are higher than the

others, the processor is not seated correctly.

NOTICE:

To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press to

apply slight pressure to the center of the processor while turning the cam screw.

2. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor to the system board.

3. Peel the backing off the thermal cooling pad and adhere the thermal pad to the portion of the processor heat sink that covers the processor.

4. Follow the instructions in

Replacing the Processor Heat

5. Update the BIOS using a flash BIOS-update program CD (see

Back to Contents Page

Sink.

Flashing the

BIOS).