CR Laser SUPER-3S Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Equipo para DJ CR Laser SUPER-3S. CR Laser SUPER-3S 17 páginas. Laser show system

Laser Show System

Before rigging make sure that the installation area can hold a minimum point

load of 10 times the device's weight.

Always use a certified safety cable that can hold 12 times the weight of the

device when installing the unit. This secondary safety attachment should be

installed in a way that no part of the installation can drop more than 20cm if the

main attachment fails.

The device should be well fixed; a free swinging mounting is dangerous and

may not be considered!

Do not cover any ventilation openings as this may result in overheating.

The operator has to make sure that the safety relating and machine technical

installations are approved by an expert before using them for the first time. The

installations should be inspected every year by a skilled person to be sure that

safety is still optimal.

CAUTION EYEDAMAGE: Always position the laser in a way that

prevents the audience from looking directly into the laser beams. The

installation should assure that the beam will not strike the audience.

5.1 Connection to the mains

Verify the power supply settings before applying power!

if you wish to change the power supply settings, see the chapter below.

Connect the fixture to mains with the

enclosed power cord and pulg.

The earth has to be connected!

The occupation of the connection-cables is as follows:

Cable(EU)

Brown

Liht blue

Yellow/Green

Cable(US)

Black

White

Green

International

Live

Neutral

Earth