Dell inspiron M4040/14-N4050 Manual del usuario - Página 27
Navegue en línea o descargue pdf Manual del usuario para Portátil Dell inspiron M4040/14-N4050. Dell inspiron M4040/14-N4050 44 páginas.
Back to Contents Page
Wireless Mini-Card
Dell Inspiron M4040/14-N4050 Owner's Manual
Removing the Mini-Card
Replacing the Mini-Card
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery, see
NOTE:
Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell.
If you ordered a wireless Mini-Card with your computer, the card is already installed.
Your computer has one half Mini-Card slot for Wireless Local Area Network (WLAN)/Bluetooth combo card.
NOTE:
Depending on the configuration of the computer when it was sold, the Mini-Card slot may or may not have a Mini-Card installed.
Removing the Mini-Card
1. Follow the instructions in
Before You
2. Remove the battery. See
Removing the
3. Follow the instructions from
4. Disconnect the antenna cables from the Mini-Card.
5. Push and release the tab that secures the Mini-Card to the connector on the system board.
6. Lift the Mini-Card out of the connector on the system board.
CAUTION:
When the Mini-Card is not in the computer, store it in protective antistatic packaging. For more information, see "Protecting Against
Electrostatic Discharge" in the safety information that shipped with your computer.
1
Mini-Card antenna cables (2)
Begin.
Battery.
step 3
to
step 8
in
Removing the Palm-Rest
2
Removing the
Assembly.
tab
Battery, before working inside the computer.