Allied Telesis CentreCOM AT-MC12T Manual del usuario - Página 2
Navegue en línea o descargue pdf Manual del usuario para Media Converter Allied Telesis CentreCOM AT-MC12T. Allied Telesis CentreCOM AT-MC12T 6 páginas.
Imprimir página
Overview
The Allied Telesyn AT-MC12T is used in addition to a transceiver
(MAU) to convert another Ethernet physical layer to 10BASE-T. It is
connected to a transceiver of the required conversion type. The
power adapter supplies power to the AT-MC12T and to the attached
transceiver.
MC12T
MC12T
MDI/MDI-X Switch
The MDI/MDI-X switch located on the side of the unit, is a straight-
through crossover cable selection switch. It enables the 10BASE-T
(RJ45) port to be connected to a repeater or to a DTE without using a
special crossover cable.
The default setting of the switch is MDI-X, which means you can
connect the 10BASE-T port to a workstation or to any other DTE that
uses a straight-through cable. In the MDI configuration, slide the
switch to the MDI side and you can connect the 10BASE-T port to a
repeater/hub/concentrator using a straight-through cable.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The CentreCOM
AT-MC12T
Media Converter User's Guide
Table 1: Possible Media Conversion
Transceiver (MAU)
Conversion Type
MX40F, MX55F, MX50
UTP—Fiber Optic
(10BASE-FL MAU)
MX10S
UTP—Thin Coax
(10BASE2 MAU)
10BASE-T
REPEATER
or 10BASE-T
WORKSTATION
AT-MC12T
AT-MX
Figure 1:
Typical Configuration
NODE
NODE
NODE