Avtech AVM311 Manual rápido
Navegue en línea o descargue pdf Manual rápido para Cámara IP Avtech AVM311. Avtech AVM311 6 páginas.
Imprimir página
QUICK GUIDE
For more product details, please visit
www.surveillance-download.com/user/m521.swf
Installation (Continued)
Step 4: The lens can be adjusted in three ways:
a. Loosen the four screws on the plate, along with which you, in
turn, can pan the camera.
Pan
Package Contents
Before starting to set up your camera, please make sure
items below are in your box:
Standard package:
Camera
Quick Guide
Optional accessories:
Screws, Wall
Desiccants
Plugs,
Wrench
Rubber
(×2)
Rings (×3)
b. Tilt the lens after loosening the two screws on either side of
the lens.
(TURN BACK TO CONTINUE)
Installation
Step 1: Uncover the dome camera by loosening the three
screws on the housing with the supplied wrench.
Note: The three screws aren't designed to be removed
from the housing.
Step 2: Attach the supplied installation sticker to your
desired installation location.
Step 3: Locate the three deepest holes on the base. (See
Pic 1.) They are where the three supplied screws
belong.
On the sticker, make holes where the three screws
and the cables are supposed to penetrate. However,
if the cables won't go through the surface, you don't
need to make the hole for them in advance.
Next, align the camera with the sticker, putting the
three screws through the holes, as well as the
cables—if necessary. Then, tighten the screws.
metal rings
Note: Put the screws through both the rubber rings and
(×3)
metal rings (optional), then into the holes. (See
Pic 2.) To be on the safe side, it is recommended
that you be assisted with installation, considering
the camera is heavy.
Tilt
c. Remove the protective case by loosening the two screws on it
before rotating the lens from behind.
Rotate
m542a_m542b_quick_V1.1
587Z
Pic 1
Pic 2