Cra-Z-Art shimmer'n Sparkle cra-Z-loom 17102 Manual de inicio rápido
Navegue en línea o descargue pdf Manual de inicio rápido para Juguete Cra-Z-Art shimmer'n Sparkle cra-Z-loom 17102. Cra-Z-Art shimmer'n Sparkle cra-Z-loom 17102 2 páginas.
Single Loop Bracelet Instructions
You
1. Start with the Tab end of the Loom facing you and refer to
the Place Pattern. Place a Band on the Loom around
Will Need:
Posts 2 & 3. Next place a Band around Posts 3 & 5, then
28 Bands &
Posts 5 & 6, and so on (figure 7). Follow this pattern all the
1 S-Clip
way along the Loom, ending at Post 42. Your loom should
look like figure 8.
Single Loop Bracelet
PLACE PATTERN
REPEAT
7
9
5
8
4
4
6
3
5
2
1
3
2
1
2. Rotate the Loom so that the Notch end
Single Loop Bracelet
faces you. Refer to the Pick Pattern.
PICK PATTERN
3. Find the Band that connects Posts 39 & 41
REPEAT
(figure 9). Pick the end of that Band that is
33
31
around Post 41 and loop it over Post 39
5
(figure 10).
35
4
4. Find the Band that connects Posts 38 & 39
36
34
(figure 11). Pick the end of that Band that is
3
38
around Post 39 and loop it over Post 38
2
(figure 12). Note that the Band you need to
39
37
pick is below the other looped Bands.
1
41
5. Continue picking and looping in this zig-zag
pattern until you've looped a Band onto Post 2.
Your Loom should look like figure 13.
6. Follow the instructions in the "Finishing It Off"
section to finish your Single Loop Bracelet.
Easy
to Add
figure 7
Beads &
Charms!
(not included)
figure 8
figure 9
figure 10
•
Use different combinations of colored Bands and follow the PLACE and
PICK Patterns to create your own unique jewelry!
•
It's easy to add beads & charms (not included). Simply string a bead
onto a finished bracelet or string a bead onto a Band before placing it
figure 11
figure 12
on the Cra-Z-Loom™.
•
If your bracelet is too tight, add extra Bands to the bracelet before
connecting with the S-Clip.
•
If your bracelet is too loose, make your bracelet shorter by not placing
Bands to the end of the Cra-Z-Loom™. Stop on Post 34 or 31 depending
upon the size you need.
•
When your bracelet is finished, you may need to tug and tidy up the loops
of your bracelet.
•
Create colorful bracelets to accessorize any outfit!
figure 13
•
Make enough bracelets to share with your friends!
WARNING: This product is not for children 6 years or younger due to potential choking
hazards. Do not wear bracelets around neck. Always make sure wearable is loose enough so
it does not cut off circulation or cause irritation. Discontinue wearing if skin redness develops.
© 2013 Cra-Z-Art® All Rights Reserved. LaRose Industries, LLC, d/b/a Cra-Z-Art, Randolph, NJ 07869 USA Products and colors may vary from those shown. At
Cra-Z-Art® we guarantee our quality. If you are not completely satisfied with our product, please call 1-800-Cra-Z-Art or visit www.Cra-Z-Art.com.
Made in China. PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE. Patent Pending.
Make 'n
Wear,
Make 'n Share
Rubber Band
Jewelry!
Cra-Z-Loom
Tips & Tricks
™
cra-Z-loom
bracelet maker
The Ultimate Rubber Band Bracelet & Accessory Maker!
The Ultimate Rubber Band Bracelet & Accessory Maker!
Design & Make Colorful Rubber Band Bracelets,
Design & Make Colorful Rubber Band Bracelets,
Rings, Pendants & More!
Rings, Pendants & More!
Latex-Free
Rubber Bands
Getting Started
This set includes everything you need to create cool
rubber band jewelry:
Loom: 42 numbered Posts which you use to create your
rubber band designs. Directional arrows guide you in
PLACING and PICKING the Bands.
Two or more Looms can be connected end-to-end or
side- to-side to make a longer or wider pieces.
Bands: 600 latex-free bands are included in your set. Mix
and match colors to create jewelry that is uniquely yours!
Hook: Use it to Pick and Loop Bands between Posts on
the Loom.
PLACE PATTERN
S-Clips: Easily connect the ends of your creations
together.
The "PICK" Patterns and "PLACE" Patterns will help you
make the jewelry. The purple circles and white numbers
represent the Pins on the Loom. The colored arrows and
numbers show the order and direction to PLACE and/or
PICK the Bands. Experiment and have fun...soon you will
be creating your own patterns!
17102/8+
17102/8+
Place,
Rotate &
Pick to
Create
Amazing
Jewelry!
Loom
Hook
S-Clips
CONNECT 2 LOOMS
PICK PATTERN
1d
2d
REPEAT
REPEAT
7
8
7
3c
9
33
31
1c
2c
8
5
6
35
3b
4
6
3
4
36
34
1b
5
2b
1
38
2
3a
1
3
39
37
1a
2
2a