Dell PowerVault 735N Manual complementario - Página 2

Navegue en línea o descargue pdf Manual complementario para Portátil Dell PowerVault 735N. Dell PowerVault 735N 3 páginas. Nas appliances. boot hard-disk drive
También para Dell PowerVault 735N: Manual de instalación (26 páginas), Manual de sustitución de hardware (10 páginas), Manual de actualización (10 páginas), Manual (18 páginas), Manual de actualización (12 páginas), Manual de actualización (8 páginas), Manual de instrucciones de sustitución (19 páginas)

Dell PowerVault 735N Manual complementario
To change the administrator password for the system, perform the following steps:
1.
Connect to the PowerVault NAS Manager from a supported Web browser and enter the
following in the browser address line:
http://systemname:1278
where systemname is Dellservice tag number . The line must appear in a format similar
to this:
http://Dell1234567:1278
You also can enter:
http://system_ipaddress:1278
See the System Administrator's Guide for a list of supported Web browsers.
2.
On the primary menu bar, click Network Setup.
3.
On the Network Setup page, click Change Administrator Password.
4.
Type the current administrator password in the Current password text box.
5.
Type the new administrator password in the New password text box.
NOTE: The new administrator password must conform to any password complexity rules in effect
for the domain to which the appliance belongs.
6.
Type the new administrator password again in the Confirm new password text box.
7 .
Click OK.
Using Terminal Service Advanced Client to Send Encrypted

Password Commands

NOTE: This procedure works only on a Windows client because the Terminal Service Advanced
Client only works on Windows operating systems.
This method sends encrypted text across the network to prevent others from seeing your
administrator password.
1.
Connect to the PowerVault NAS Manager from a supported Web browser using the information
in step 1 of the previous procedure.
2.
On the primary menu bar, click Maintenance.