Dell Studio 1435 Manual de servicio - Página 8

Navegue en línea o descargue pdf Manual de servicio para Portátil Dell Studio 1435. Dell Studio 1435 42 páginas. Notebook dell studio 1435

Back to Contents Page

Center Control Cover

Dell Studio™ 1435 Service Manual

Removing the Center Control Cover

Replacing the Center Control Cover

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as a connector on the back of the computer).

NOTICE:

To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the

computer.

Removing the Center Control Cover

1. Follow the procedures in

Before You

2. Turn the computer over and remove the four screws in the battery bay.

3. Turn the computer top side up, and open the display as far as it will open.

4. Ease the center control cover up with a plastic scribe from the back of the computer.

5. Ease the center control cover up until you see the media control buttons cable that attaches the center control cover to the system board.

NOTICE:

Be extremely careful when removing the center control cover. The cover along with the cable that attaches it to the system board are very

fragile.

center control cover

media control buttons cable connector

connector latch

media control buttons cable

6. Release the connector latch that secures the cable to the connector on the center control cover and remove the cable.

7. Lift the center control cover off the computer.

Begin.