Dell Vostro 5480 Manual de conexión de la pantalla externa - Página 4

Navegue en línea o descargue pdf Manual de conexión de la pantalla externa para Portátil Dell Vostro 5480. Dell Vostro 5480 8 páginas.
También para Dell Vostro 5480: Manual del usuario (45 páginas), Manual de inicio rápido (10 páginas), Manual del usuario (40 páginas), Configuración y especificaciones (31 páginas)

You can connect up to four 4K external displays or one 8K and above display using the four Thunderbolt 4 on your Precision

5480.

Total number of displays supported:

● Four 4K external displays: 4 ports (Thunderbolt 4)

● One 8K

Before you begin, ensure that you:

●

The number of external displays that are supported depends on the type of graphics card available on your computer:

● The integrated graphics card can support a maximum of 4 displays.

● The hybrid graphics card can support a maximum of 4 displays.

NOTE:

● Dell Docking Station—WD19DCs display behavior follows the host the Thunderbolt 4 (USB Type-C) port.

● The HDMI 2.1 port and MFDC (MFDP) Type-C port on the WD19DCs docking station cannot support dual monitors

simultaneously.

For more information about the graphics card available on your computer, run Dell SupportAssist on your computer, or scan your

hardware at www.dell.com/support.

The following are the graphic options that may be installed in your computer:

● Intel Iris X

Graphics (Integrated graphics)

● NVIDIA RTX A1000 laptop GPU (Hybrid graphics)

● NVIDIA RTX 2000 Ada Generation laptop GPU (Hybrid graphics)

● NVIDIA RTX 3000 Ada Generation laptop GPU (Hybrid graphics)

There may be instances where you may want to turn off the computer's internal display to connect more external displays.

You can turn off the LCD display of your computer by using the Intel HD Graphics Command Center.

To turn off the display:

1. In the Windows search bar, type Intel Graphics Command Center and press <Enter>.

2. Accept the Intel Graphics Command Center software licence agreement.

3. On the Intel Graphics Command Center window, click Display. The list of active displays is listed under the Connected

Displays section.

4. Click the ellipsis (...) in the top-right corner of your primary display, then click Extend > Display 2.

5. Click the ellipsis (...) in the top-right corner of display 2, then click Make Display Primary.

6. Click the ellipsis (...) in the top-right corner of your computer's display, then click Disable.

Before you begin