Dell D16S Configuración y especificaciones - Página 24

Navegue en línea o descargue pdf Configuración y especificaciones para Escritorio Dell D16S. Dell D16S 37 páginas.

Dell D16S Configuración y especificaciones
Table 19. System Configuration (continued)
Option

Video screen options

Table 20. Video
Option
Multi-Display
Primary Display

Security

Table 21. Security
Option
Admin Password
System Password
Password Configuration
Password Bypass
Password Change
UEFI Capsule Firmware
Updates
24
System setup
Description
● Disabled
● 15 days
● 30 days
● 60 days
● 90 days
● 120 days
● 150 days
● 180 days
Description
The option is selected by default.
Allows you to select the primary display when multiple controllers are available in the system.
● Auto (default)
● Intel HD Graphics
NOTE:
If you do not select Auto, the on-board graphics device will be present and
enabled.
Description
Allows you to set, change, and delete the admin password.
Allows you to set, change, and delete the system password.
Allows you to control the minimum and maximum number of characters that are allowed for
an administrative password and the system password. The range of characters is between 4
and 32.
This option lets you bypass the System (Boot) Password and the internal hard drive
password prompts during a system restart.
● Disabled — Always prompt for the system and internal HDD password when they are set.
This option is disabled by default.
● Reboot Bypass — Bypass the password prompts on Restarts (warm boots).
NOTE:
The system will always prompt for the system and internal HDD passwords when
powered on from the off state (a cold boot). Also, the system will always prompt for
passwords on any module bay HDDs that may be present.
This option lets you determine whether changes to the System and Hard Disk passwords are
permitted when an administrator password is set.
Allow Non-Admin Password Changes - This option is enabled by default.
This option controls whether this system allows BIOS updates via UEFI capsule update
packages. This option is selected by default. Disabling this option will block BIOS updates
from services such as Microsoft Windows Update and Linux Vendor Firmware Service
(LVFS).