Dell D19M Manual del usuario - Página 28

System Error Messages

Table 3. System error messages

System Message

Alert! Previous attempts at booting this system

have failed at checkpoint [nnnn]. For help in

resolving this problem, please note this checkpoint

and contact Dell Technical Support

CMOS checksum error

CPU fan failure

System fan failure

Hard-disk drive failure

Keyboard failure

No boot device available

No timer tick interrupt

NOTICE - Hard Drive SELF MONITORING SYSTEM

has reported that a parameter has exceeded its

normal operating range. Dell recommends that

you back up your data regularly. A parameter out

of range may or may not indicate a potential hard

drive problem

Description

The computer failed to complete the boot routine

three consecutive times for the same error.

RTC is reset, BIOS Setup default has been loaded.

CPU fan has failed

System fan has failed

Possible hard disk drive failure during POST

Keyboard failure or loose cable. If reseating the

cable does not solve the problem, replace the

keyboard.

No bootable partition on hard disk drive, the hard

disk drive cable is loose, or no bootable device

exists.

•

If the hard drive is your boot device, ensure that

the cables are connected and that the drive is

installed properly and partitioned as a boot

device.

•

Enter system setup and ensure that the boot

sequence information is correct.

A chip on the system board might be

malfunctioning or motherboard failure.

S.M.A.R.T error, possible hard disk drive failure.