ENSOTECH MR-30 Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Cables y conectores ENSOTECH MR-30. ENSOTECH MR-30 5 páginas.

Increasing the efficiency of your electronic power system

MR-30 AMASS connector on mini scale R/C

In the past 6 months we've even seen many drivers use different methods trying to increase

the performance of their electronic power system, such as using an external capacitor, higher

grade cable, higher discharge rate batteries and others.

However, they still struggle in

achieving a positive result.

To achieve the best efficiency of an electronic power system, a good current flow is required

from the power source to the ESC as well as to the motor. Any element (e.g. low quality

material / weak and loose connection) disrupts this flow, and this obstruction results in a

decrease in the final power output.

Instead of wasting money and many hours of unnecessary work to get un-significant results, a

simple and bargain battery connector could take your car to next level!

Although micro JST type battery connectors are the actual norm in 1/28 and other micro

scale racing, these connectors can no longer satisfy today's micro racers' needs. Micro JST

type battery connectors were initially (and most probably) engineered for balance charging

lithium type batteries. But in no way were they supposed to serve as the main 'power

bridge' between the power source and an ESC. This is also proven in the larger scale R/C

applications, where a separate connector type is used to 'bridge' the main power flow to the

ESC, and the JST connector is also available to be used to balance charge the lithium battery.