ENSOTECH SWAVE-E2 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Cables y conectores ENSOTECH SWAVE-E2. ENSOTECH SWAVE-E2 11 páginas. Electronic speed controller
También para ENSOTECH SWAVE-E2: Manual (11 páginas)

Imprimir página

HARDWARE IS YOUR EXCELLENCE

SENSORS RECOGNITION SYSTEM

Swave E ESC has sensors recognition system. So, if you connect sensor cable to ESC the hall sensors icon will still

grey. Then if you push throttle with connected sensor cable and all is correct sensors icon becomes blue. If something

is wrong ESC detects the error and show warning icon, also, red led will ON

Initial sensor connection or sensorless

mode

ESC LED INDICATION

-Red

led is failure indicator, there are several events that may cause red LED turn on.

-Throttle receiver is disconnected or was not calibrated –

-Cut Off issue occurs –

RED

-Protection issue occurs –

-Sensor issue occurs –

RED

-Blue

led indicates the status of the device, if it is constant ON or blinks your device works normal otherwise try to

update it. If Update does not help, connect our support team: [email protected] or contact your dealers.

-Turbo timing advance and Boost timing advance are BOTH zero –

Unit F, 6 Floor, Cheung Hing Shing Centre, No.23, Sha Tsui Road, Tsuen Wan,

Working on sensor mode

LED blinks

RED

LED is constant ON

LED blinks

WWW.ENSOTECH.LTD

New Territories, Hong Kong

RED

LED is constant ON

BLUE

led blinks otherwise it is constant ON

Error with sensor