Dell Inspiron 546s Manual de servicio - Página 16

Navegue en línea o descargue pdf Manual de servicio para Escritorio Dell Inspiron 546s. Dell Inspiron 546s 50 páginas. Service manual

1 front alignment notch 2 processor pin-1 indicator 3 rear alignment notch

4 processor cover

5 center cover latch

7 socket

8 tab

Inspiron 546s

1 socket

2 processor pin-1 indicator

3 processor 4 release lever

4. For Inspiron 535s/537s/545s, orient the front and rear alignment-notches on the processor with the front and rear alignment-notches on the socket.

5. Align the pin-1 corners of the processor and socket.

CAUTION:

To avoid damage, ensure that the processor aligns properly with the socket, and do not use excessive force when you install the

processor.

6. Set the processor lightly in the socket and ensure that the processor is positioned correctly.

7. When the processor is fully seated in the socket, close the processor cover, if applicable.

Ensure that the tab on the processor cover is positioned underneath the center cover latch on the socket.

8. Pivot the socket release lever back toward the socket, and snap it into place to secure the processor.

9. Clean the thermal grease from the bottom of the heat sink.

CAUTION:

Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a

requirement for optimal processor operation.

10. Apply the new thermal grease to the top of the processor.

11. Replace the processor fan and heat sink assembly (see

CAUTION:

Ensure that the processor fan/heat sink assembly is correctly seated and secure.

6 processor

9 release lever

Replacing the Processor Fan and Heat Sink

Assembly).