Allied Telesis TQ6000 Manual de instalación rápida

Navegue en línea o descargue pdf Manual de instalación rápida para Punto de acceso inalámbrico Allied Telesis TQ6000. Allied Telesis TQ6000 4 páginas. Gen2 wireless access point

Imprimir página

Quick Installation Guide

TQ6000 GEN2 Wireless Access Point

TQ6000 GEN2 Wireless Access Points

The access point models included in this Quick Installation guide are:

TQ6702 GEN2 802.11ax Dual-radio 5G/2.4GHz 8x8+4x4 access point



TQm6702 GEN2 802.11ax Dual-radio 5G/2.4GHz 8x8+4x4 access point



TQ6602 GEN2 802.11ax Dual-radio 5G/2.4GHz 4x4+4x4 access point



TQm6602 GEN2 802.11ax Dual-radio 5G/2.4GHz 4x4+4x4 access point



Installation and User's Guides

This document contains an abbreviated version of the installation instructions for the

TQ6000 GEN2 Wireless Access Point. For complete installation and management

instructions, see the TQ6000 GEN2 Wireless Access Point Installation Guide and TQ6000

GEN2 Management Software User's Guide on the Allied Telesis web site at

www.alliedtelesis.com/library.

Physical Description

Console Port

(For manufacturing purpose only)

DC IN Connector

for AC/DC Adapter

LAN1 POE+ Port

Power Switch

LAN2 POE+ Port

Reset Button

Safety Precautions and Site Requirements

Review the safety precautions and site requirements in the TQ6000 GEN2 Wireless

Access Point Installation Guide before installing the device.

*613-003030 Rev C*

613-003030 Rev C

Package Contents

The wireless access points come with the following items in the shipping container:

One TQ6000 GEN2 Wireless Access Point



This Quick Installation Guide



One mounting bracket



Two M5 x4.5 mm pan-head screws for the mounting bracket



If any item is missing or damaged, contact your Allied Telesis sales representative for

assistance. You should retain the original shipping material in case you need to return the

unit to Allied Telesis.

Installation Options

You can install the access point on a desktop, celling, or wall. See the correct access point

orientations:

Desktop

Ceiling

Wall

Do not install the access point facing down.

Pre-fitting the Mounting Bracket

Before installing the mounting bracket on a wall or ceiling, pre-fit the bracket to the

access point.

Place the access point upside down on a table.

Install the two screws (provided) fully into the bottom panel of the access point.

The screw collar provides the proper spacing for the mounting bracket beneath the

screw head.

Make sure that the mounting bracket fits to the access point by sliding the bracket

beneath the screws.

Slide the mounting bracket forward and remove it from the access point.

Collar