Dell Wyse Z90D7 Manual de instalación - Página 11

Navegue en línea o descargue pdf Manual de instalación para Escritorio Dell Wyse Z90D7. Dell Wyse Z90D7 18 páginas. Z class cloud clients
También para Dell Wyse Z90D7: Manual de instalación (24 páginas), Manual de inicio rápido (6 páginas), Manual de inicio rápido (8 páginas), Manual de inicio rápido (8 páginas), Manual de inicio rápido (8 páginas), Manual de inicio rápido (6 páginas), Manual de inicio rápido (6 páginas), Manual de inicio rápido (8 páginas), Manual de inicio rápido (6 páginas), Manual de inicio rápido (6 páginas)

Installing WES7p Firmware

This chapter includes the requirements and procedures you need to install and use

Wyse USB Firmware Tool to update your thin client to WES7p firmware.

TIP: The purpose of the USB Firmware Tool is to configure a bootable USB key for

device firmware. In the following procedures, you will create a configured USB key

containing the firmware contents that you need, and then boot from this configured

USB key on appropriate product and flash size devices to push the contents of the USB

key onto these target devices.

EXTREEMLY IMPORTANT: You must perform the steps to create and use the

configured USB key on each thin client as noted. You cannot completely convert one

thin client and then use the USB Firmware Tool to pull and push that image to your

other thin clients.

•

Machine with a minimum of 16 GB of free space running either of the following:

Windows Server 2008 R2 SP1

Windows 7 Enterprise (32-bit and 64-bit)

Windows 7 Ultimate (32-bit and 64-bit)

USB Key:

USB 2.0 only

USB key size should be 16 GB (see also "USB Keys - Troubleshooting Boot Issues")

CAUTION: During the USB key configuration process the USB keys will be

reformatted.