Dell Dimension 2400 Series Instrucciones de instalación de la estantería - Página 15

Navegue en línea o descargue pdf Instrucciones de instalación de la estantería para Servidor Dell Dimension 2400 Series. Dell Dimension 2400 Series 32 páginas. Vga card installation instructions
También para Dell Dimension 2400 Series: Manual de configuración rápida (2 páginas), Manual de configuración rápida (2 páginas), Manual de instalación (20 páginas), Manual de instalación (8 páginas), Instrucciones de instalación (1 páginas), Manual (43 páginas)

support.dell.com

Before You Begin

Before you begin installing your PowerEdge system in the rack, carefully read

"Safety Instructions" found earlier in this guide.

To install the rack kit, you need the following tools:

•

Installation template

•

A #2 Phillips-head screwdriver

•

A flat-blade screwdriver

•

Masking tape or felt-tip pen

NOTES: If you purchased a Dell rack along with your PowerEdge system, the slide

assemblies may be preinstalled in the rack.

For instructions on installing the PowerEdge system itself, see "Installing the

PowerEdge System in the Rack" found later in this guide.

To install the slide assemblies in the rack, perform the following steps:

Remove the rack's front and back doors.

Install the slide assemblies in the rack.

The subsections that follow include instructions for performing these tasks.

You must remove the doors from the rack to provide access to the interior of the rack

and to prevent damage to the doors while installing the kit. To remove the doors,

perform the following steps.

CAUTION: To prevent personal injury due to the size and weight of the

doors, never attempt to remove the doors by yourself.

Open the latch on the front door. If you have a 24-U (1 U=1.75-inches) rack cabi-

net, unlock and twist the handle clockwise and open the door (see Figure 1-2).

Dell PowerEdge 2400 Systems Rack Installation Guide

1-3