Dell DX6000 Manual de introducción - Página 7

Navegue en línea o descargue pdf Manual de introducción para Servidor Dell DX6000. Dell DX6000 28 páginas. Rack installation instructions — static rails
También para Dell DX6000: Manual complementario (4 páginas), Instrucciones de instalación del hardware (2 páginas), Manual del usuario (46 páginas), Manual de instalación y configuración (43 páginas), Manual de instalación y configuración (35 páginas), Aviso (28 páginas), Aviso (20 páginas), Visión general (19 páginas), Manual de configuración (9 páginas), Manual de configuración (9 páginas), Nota de publicación (8 páginas), Manual de referencia (12 páginas), Manual de configuración (7 páginas), Nota de publicación (6 páginas), Nota de publicación (5 páginas), Notas de publicación (5 páginas), Instrucciones de instalación (2 páginas), Instrucciones de instalación (2 páginas)

2.1.2. Layer 3 Switching and Routing

A router or a layer 3 switch routes network packets between subnets. A router segregates network

traffic by filtering packets based on the subnet to which they are addressed. This segregation is

important so that DX Storage nodes have predicable network bandwidth for their use and so that

their multicast and unicast traffic doesn't interfere with computers on the rest of the network.

When selecting Ethernet switching hardware, consider that many client workstations have 100Mbps

network interfaces and it might not be cost effective to connect these workstations to Gigabit ports.

Additionally, the operating systems and applications running on these workstations might be unable

to effectively utilize more than 100Mbps of bandwidth.

The following figure shows a network architecture where workstations, enterprise servers, and DX

Storage nodes are isolated on appropriately sized switches.

Version 5.0

December 2010