Dell DX6000G Manual del usuario - Página 40

Navegue en línea o descargue pdf Manual del usuario para Servidor Dell DX6000G. Dell DX6000G 48 páginas. Rack installation instructions — static rails
También para Dell DX6000G: Notas de publicación (7 páginas), Manual de instalación y configuración (23 páginas), Instalación de bastidores (2 páginas), Instalación de bastidores (2 páginas)

Connecting the DX Cluster Services Node to the

Private and Public Networks

•

Connect the lower NIC ports 0-1 of the DX Cluster Services Node to the

external private network switch.

•

Connect the upper NIC ports 2-3 of the DX Cluster Services Node to the

internal network switch.

Connecting the DX Storage Nodes to the Private

Network

Connect all the NIC ports (LOM as well as add on card, if available) of each

storage node to the internal private network switch.

NOTE:

Do not turn on the storage nodes at this time.

Creating a Local YUM Repository on the DX6000

System

The DX Cluster Services Node software installation process is dependent on

additional rpm packages that are not installed on the systems by default.

These packages are available on the Red Hat Enterprise Linux distribution

media included with the system. A local YUM repository is required to update

the system with the package dependencies for the DX Cluster Services Node

software installation.

To create a local YUM repository on your system:

1 Turn on the DX Cluster Services Node.

2 Insert the operating system media that came with the system into the

optical drive and allow the file system to auto mount. The default

directory path for the auto mounted file system is /media/RHELx.x\

x86_64\ DVD. The white spaces in this file path causes errors during the

YUM setup process. If the drive auto mounts, run the following

commands:

# mkdir /media/dvd

# mount --move /media/RHEL_x.x\ x86_64\ DVD

/media/dvd

Disaster Recovery