Dell DX6000G Manual de instalación y configuración - Página 8

Navegue en línea o descargue pdf Manual de instalación y configuración para Servidor Dell DX6000G. Dell DX6000G 23 páginas. Rack installation instructions — static rails
También para Dell DX6000G: Manual del usuario (48 páginas), Notas de publicación (7 páginas), Instalación de bastidores (2 páginas), Instalación de bastidores (2 páginas)

Cluster secondary node address: Enter the IP address or hostname for a second DX

Storage node in the target cluster for redundancy. The target cluster must be the same as

the one configured for all CFS mounts.

Secondary node SCSP port: Enter the port the secondary DX Storage node uses for

SCSP communications. The default is '80'.

If 'Yes' is selected:

Cluster name Enter the name of the DX Storage cluster. This must match the value of

the DX Storage "cluster" parameter in the node.cfg file and be the same target cluster as

the one configured for all CFS mounts. Note that if using Zeroconf for discovering the list

of nodes and using a cluster name with periods in it, the periods should be replaced with

underscores to ensure proper node discovery.

Do you want me to email you the Root UUID for CNS? Whether or not you would like the

generated root UUID for the name space in DX Storage emailed to you. The root id is critical

to recovering the name space in the event of a name space server failure and should be saved

in a safe location. The email function will only work with SMTP servers that do not require

authentication.

If you answer yes, you will be prompted to enter email server and address information:

SMTP email server: The SMTP email server that should be used to send the email.

Ex: mail.host.com. A mail account of 'admin' at the specified mail server is assumed

(i.e. [email protected]) as the sending account. Mail servers without an admin

account will not be able to send the root uuid email.

ii.

Your email address: The email address to which the root id should be sent. Ex:

If you answer no, the utility will confirm that a new root id for the name space has been

created with a message similar to the following:

Generated New Root Anchor [f223011d1fa56f67cf79a87a5de45901]

Warning

If the configuration utility detects that a root id already exists it will ask you if you would

like to create a new one. Answering 'yes' to this question will create a new root and delete

all local CFS state information (spool, cache, etc.), as you will not be able to access the

information in the shares once the name space root has changed. The configuration files

for all shares will remain intact. You must stop CFS and CNS prior to attempting to create

a new root id.

The script will ask if you would like CNS to be started once you confirm the root id. 'Yes' is

recommended as a functioning namespace is required for CFS configuration. The created

configuration file will be located in: /opt/caringo/fabric/etc/cns.conf. Manual editing of this file is not

recommended unless under direct advice from your technical support contact.

Note

Administrators who experience email send errors should consult /var/log/

caringo/smtp.log.

Version 2.6

February 2011