Dell E43S001 Manual de referencia - Página 24

Navegue en línea o descargue pdf Manual de referencia para Servidor Dell E43S001. Dell E43S001 26 páginas.

Imprimir página

Option

Description

Redundant OS

Boot

When set to Enabled, BIOS boots to the device specified in Redundant OS Location. When set to

Disabled, BIOS preserves the current boot list settings. This option is set to Disabled by default.

Miscellaneous Settings

You can use the Miscellaneous Settings screen to perform specific functions such as updating the asset tag and changing the

system date and time.

Viewing Miscellaneous Settings

To view the Miscellaneous Settings screen, perform the following steps:

Steps

1. Power on, or restart your system.

2. Press F2 immediately after you see the following message:

F2 = System Setup

NOTE:

If your operating system begins to load before you press F2, wait for the system to finish booting, and then

restart your system and try again.

3. On the System Setup Main Menu screen, click System BIOS.

4. On the System BIOS screen, click Miscellaneous Settings.

Miscellaneous Settings details

About this task

The Miscellaneous Settings screen details are explained as follows:

Option

Description

System Time

Enables you to set the time on the system.

System Date

Enables you to set the date on the system.

Asset Tag

Specifies the asset tag and enables you to modify it for security and tracking purposes.

Keyboard

Enables you to set whether the system should boot with the NumLock enabled or disabled. This option is

NumLock

set to On by default.

F1/F2 Prompt on

Enables or disables the F1/F2 prompt on error. This option is set to Enabled by default. The F1/F2

Error

prompt also includes keyboard errors.

Load Legacy

Enables you to determine whether the system BIOS loads the legacy video (INT 10H) option ROM from

Video Option

the video controller. Selecting Enabled in the operating system does not support UEFI video output

ROM

standards. This field is available only for UEFI boot mode. You cannot set the option to Enabled if UEFI

Secure Boot mode is enabled. This option is set to Disabled by default.

Dell Wyse

Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set to Enabled by default.

P25/P45 BIOS

Access

Power Cycle

Enables or disables the Power Cycle Request. This option is set to None by default.

Request

Pre-operating system management applications

NOTE:

This option is disabled if Redundant OS Location is set to None or if Redundant OS State

is set to Hidden.

NOTE:

This option does not apply to 84-key keyboards.