Dell E45S003 Manual de referencia - Página 14
Navegue en línea o descargue pdf Manual de referencia para Servidor Dell E45S003. Dell E45S003 23 páginas.
Imprimir página
Integrated Devices
To view the Integrated Devices screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Integrated Devices.
Table 17. Integrated Devices details
Option
User Accessible USB Ports
Internal USB Port
iDRAC Direct USB Port
Integrated RAID Controller
Embedded NIC1 and NIC2
Embedded Video Controller
Current State of Embedded Video
Controller
Root Complex 0x00 LCLK Frequency
Root Complex 0x40 LCLK Frequency
14
Pre-operating system management applications
Description
Configures the user accessible USB ports. Selecting Only Back Ports On
disables the front USB ports; selecting All Ports Off disables all front and
back USB ports; selecting All Ports Off (Dynamic) disables all front and back
USB ports during POST. This option is set to All Ports On by default.
When user accessible USB ports is set to All Ports Off (Dynamic) the
Enable Front Ports Only option is enabled.
● Enable Front Ports Only: Enables or disables the front USB ports during
the OS runtime.
The USB keyboard and mouse still function in certain USB ports during the
boot process, depending on the selection. After the boot process is complete,
the USB ports will be enabled or disabled as per the setting.
Enables or disables the Internal USB Port. This option is set to On or Off.
This option is set to On by default.
The iDRAC Direct USB port is managed by iDRAC exclusively with no host
visibility. This option is set to ON or OFF. When set to OFF, iDRAC does not
detect any USB devices installed in this managed port. This option is set to On
by default.
Enables or disables the integrated RAID controller. This option is set to
Enabled by default.
Enables or disables the Embedded NIC1 and NIC2 options. If set to Disabled
(OS), the NIC may still be available for shared network access by the
embedded management controller. Configure the Embedded NIC1 and NIC2
option by using the NIC management utilities of the system.
Enables or disables the use of Embedded Video Controller as the primary
display. When set to Enabled, the Embedded Video Controller will be the
primary display even if add-in graphic cards are installed. When set to
Disabled, an add-in graphics card will be used as the primary display. BIOS
will output displays to both the primary add-in video and the embedded video
during POST and pre-boot environment. The embedded video will then be
disabled right before the operating system boots. This option is set to Enabled
by default.
NOTE:
When there are multiple add-in graphic cards installed in the
system, the first card discovered during PCI enumeration is selected as
the primary video. You might have to re-arrange the cards in the slots in
order to control which card is the primary video.
Displays the current state of the embedded video controller. The Current
State of Embedded Video Controller option is a read-only field. If the
Embedded Video Controller is the only display capability in the system (that
is, no add-in graphics card is installed), then the Embedded Video Controller
is automatically used as the primary display even if the Embedded Video
Controller setting is set to Disabled.
Sets the LCLK frequency for Bus address 0x00.
NOTE:
This option is only available for 3rd Generation AMD EPYC
processors.
Sets the LCLK frequency for Bus address 0x40.
NOTE:
This option is only available for 3rd Generation AMD EPYC
processors.