Dell E74S001 Manual de referencia - Página 17

Navegue en línea o descargue pdf Manual de referencia para Servidor Dell E74S001. Dell E74S001 25 páginas.

Imprimir página

Table 17. Serial Communication details (continued)

Option

Redirection After Boot

System Profile Settings

To view the System Profile Settings screen, power on the system, press F2, and click System Setup Main Menu > System

BIOS > System Profile Settings.

Table 18. System Profile Settings details

Option

System Profile

CPU Power Management

Memory Frequency

Turbo Boost

C1E

C States

Memory Patrol Scrub

Memory Refresh Rate

Uncore Frequency

Energy Efficient Policy

Monitor/Mwait

Workload Profile

Description

Enables or disables the BIOS console redirection when the operating system is

loaded. This option is set to Enabled by default.

Description

Sets the system profile. If you set the System Profile option to a mode other than Custom,

the BIOS automatically sets the rest of the options. You can only change the rest of

the options if the mode is set to Custom. This option is set to Performance Per Watt

(DAPC) by default. Other options include Performance, Performance Per Watt (OS) and

Custom.

NOTE:

All the parameters on the system profile setting screen are available only when

the System Profile option is set to Custom.

Sets the CPU power management. This option is set to System DBPM (DAPC) by default.

Other option includes Maximum Performance, OS DBPM.

Sets the speed of the system memory. You can select Maximum Performance, Maximum

Reliability or a specific speed. This option is set to Maximum Performance by default.

Enables or disables the processor to operate in the turbo boost mode. This option is set to

Enabled by default.

Enables or disables the processor to switch to a minimum performance state when it is idle.

This option is set to Enabled by default.

Enables or disables the processor to operate in all available power states. C States allow the

processor to enter lower power states when idle. When set to Enabled (OS controlled) or

when set to Autonomous (if hardware controlled is supported), the processor can operate

in all available Power States to save power, but may increase memory latency and frequency

jitter. This option is set to Enabled by default.

Sets the memory patrol scrub mode. This option is set to Standard by default.

Sets the memory refresh rate to either 1x or 2x. This option is set to 1x by default.

Enables you to select the Uncore Frequency option. Dynamic mode enables the processor

to optimize power resources across cores and uncores during runtime. The optimization of

the uncore frequency to either save power or optimize performance is influenced by the

setting of the Energy Efficiency Policy option.

Enables you to select the Energy Efficient Policy option. The CPU uses the setting to

manipulate the internal behavior of the processor and determines whether to target higher

performance or better power savings. This option is set to Balanced Performance by

default.

Enables the Monitor/Mwait instructions in the processor. This option is set to Enabled for all

system profiles, except Custom by default.

NOTE:

This option can be disabled only if the C States option in the Custom mode is set

to disabled.

NOTE:

When C States is set to Enabled in the Custom mode, changing the Monitor/

Mwait setting does not impact the system power or performance.

This option allows the user to specify the targeted workload of a server. It allows

optimization of performance based on the workload type. This option is set to Not

Configured by default.

Pre-operating system management applications