DH Lifelabs Sciaire + HEPA Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para Limpiador de aire DH Lifelabs Sciaire + HEPA. DH Lifelabs Sciaire + HEPA 4 páginas.

Imprimir página

Your safety is important to us.

Please read the full instruction manual

online and all safety instructions before

you use the device.

WARNING! TO REDUCE THE RISK OF

FIRE, ELECTRIC SHOCK OR INJURY

PLEASE ADHERE TO THE FOLLOWING:

This device complies with the

maxiumum allowable concentration

of ozone of 0.050 parts per million by

volume (ppmv) in a 24 hour period.

Always place device on a firm, flat level

surface that is secure. Do not place

device where it is likely to be bumped

or knocked over.

Do not sit, stand, or place heavy objects

on the device.

The device must be in the upright

position at all times.

NEVER place containers with liquid or

drinks on top of the device. Spilling

liquids into it can damage the device

and potentially cause electric shock or

create a fire hazard.

This device is intended for household

and indoor use only. Do not use

outdoors.

This device is not recommended for

use by children under the age of 8, and

children and vulnerable consumers

should have adequate supervision or

instruction when interacting with the

device.

Only use the device after fully

assembled.

Only use this device with supplied

accessories.

Do not allow foreign objects to enter

ventilation or exhaust opening as this

may cause electric shock or damage to

the device. Do not block air outlets or

intakes.

Do not cover the device while in use.

Locate the device near an outlet and

avoid using an extention cord or power

strip.

For best performance, place the device

on the floor at least 3 feet from any wall

or device.

Always follow basic precautions when

using device to reduce the risk of fire,

electric shock, and personal injury.

Ensure the electrical outlet used with

the device is not loose or damaged.

A poor electrical connection can result

in overheating and damage to the

power cord.

To disconnect the device, make sure it

is powered off, then grip the plug and

pull it from the wall outlet. NEVER pull

the cord to unplug it.

Keep the power cord away from hot

surfaces.

Do not use if you believe the device

has been damaged or is faulty. If the

device is not working properly or has

been dropped or damaged, contact

customer support.

Do not route the power cord under or

cover it with carpet. Route the power

cord to minimize the possibility that

someone could trip over it.

Do not expose the device to moisture:

avoid areas where it might come in

contact with water such as bathrooms

or laundry rooms.

Disconnect all power to the device and

turn off all controls before unplugging.

Always unplug the device if not in

use and while cleaning or other

maintenance.

The device is not user serviceable.

Do not attempt to repair the device

yourself. In the event of failure,

contact customer support.

If the supply cord is damaged, it must

be replaced by the manufacturer, its

service agent or similarly qualified

persons in order to avoid a hazard.

The input voltage is 220-240V, 50-60Hz.

Read all safety

instructions in this quick

start guide, the online

instruction manual, and

on device.