DH Lifelabs Sciaire Mini + HEPA Manual de inicio rápido - Página 4

Navegue en línea o descargue pdf Manual de inicio rápido para Limpiador de aire DH Lifelabs Sciaire Mini + HEPA. DH Lifelabs Sciaire Mini + HEPA 4 páginas.
También para DH Lifelabs Sciaire Mini + HEPA: Manual de instrucciones (10 páginas), Manual de inicio rápido (4 páginas), Manual de inicio rápido (4 páginas)

Imprimir página
Control Panel
Timer
(2H/4H/8H) Set the timer to have
the device turn off automatically
Sleep Mode
Lowest fan speed level that
is ultra-quiet
On/Off
Powers the device on and off
Auto Mode
Blue: Air Quality Good
Yellow: Air Quality Moderate
Red: Air Quality Poor
5
Fan Speed
(1/2/3) Three fan speeds
Plasma On/Off
Press the icon to toggle the plasma
purification function on or off
Filter Replacement
Indicator
After changing filter, press for
3 seconds to reset the filter life
countdown
Real-Time Air Quality Indicator Ring
Good
Moderate
Cleaning and Maintenance
Always unplug the device if not in use and while cleaning.
When the device is not used for an extended time, store it
in a cool dry place. Do not store the device where it might
be exposed to excess moisture or direct sunlight. May not
operate effectively in freezing temperatures. Use a dry cloth
to clean the exterior of the device. Do not use any chemicals
or cleaners.
Cleaning the Air Quality Sensor
The inlet for the air quality sensor is located at the back of
the device as shown. The inlet should be cleaned every 2
months using a vacuum or with a cotton swab that has been
lightly moistened with clean water.
Copyright © 2022 Dernier & Hamlyn Inc. All rights reserved.
Poor
AIR QUALITY SENSOR
6