Dell EMC VxFlex Series Manual del usuario - Página 34
Navegue en línea o descargue pdf Manual del usuario para Servidor Dell EMC VxFlex Series. Dell EMC VxFlex Series 46 páginas.
Imprimir página
System diagnostics and indicator codes
Indicator codes
The diagnostic indicators on the system front panel display system status during system startup and assist you in
diagnosing system health.
Status LED indicators
The status indicators display solid amber if any error occurs on the system.
Table 28 Status LED indicators and descriptions
Icon
Description
Condition
Drive
The indicator turns solid amber if
indicator
there is a drive error.
Temperature
The indicator turns solid amber if
indicator
the system experiences a
thermal error (for example, the
ambient temperature is out of
range or there is a fan failure).
Electrical
The indicator turns solid amber if
indicator
the system experiences an
electrical error (for example,
voltage out of range, or a failed
power supply unit (PSU) or
voltage regulator).
Memory
The indicator turns solid amber if
indicator
a memory error occurs.
PCIe indicator The indicator turns solid amber if
a PCIe card experiences an error.
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of your system.
Figure 16 System health and system ID indicators
R740xd Owner's Guide
34
Corrective action
Check the System Event Log to determine if the drive has an
l
error.
Run the appropriate Online Diagnostics test. Restart the system
l
and run embedded diagnostics (ePSA).
Ensure that none of the following conditions exist:
A cooling fan has been removed or has failed.
l
System cover, air shroud, memory module blank, or back filler
l
bracket is removed.
Ambient temperature is too high.
l
External airflow is obstructed.
l
If the problem persists, see
Check the System Event Log or system messages for the specific
issue. If it is due to a problem with the PSU, check the LED on the
PSU. Reseat the PSU.
If the problem persists, see
Check the System Event Log or system messages for the location of
the failed memory. Reseat the memory module.
If the problem persists, see
Restart the system. Update any required drivers for the PCIe card.
Reinstall the card.
If the problem persists, see
Getting help
on page
45.
Getting help
on page
45.
Getting help
on page
45.
Getting help
on page
45.