Dell PowerApp 110 Manual de instalación - Página 19
Navegue en línea o descargue pdf Manual de instalación para Servidor Dell PowerApp 110. Dell PowerApp 110 34 páginas. Rack installation guide
Imprimir página
support.dell.com
Installing Tab Covers
CAUTION: The appliance's two-post flush-mount slide assembly does not
have a safety stop. Use care when sliding the appliance in and out of the
rack; the appliance could fall out of the rack, possibly resulting in bodily
injury and damage to the appliance.
1.
Push the appliance completely into the rack.
2.
Center the thumbscrew on the tab cover with the clearance hole on the appli-
ance tab, and align the slot on the tab cover with the opening on the appliance
tab (see Figure 1-9).
thumbscrew
Figure 1-9. Installing the Tab Cover
3.
Hold the tab cover firmly onto the server tab and engage the thumbscrew with
the receiving fastener on the slide bracket.
4.
Repeat steps 1 through 3 to install the tab cover on the other side of the
appliance.
This completes the two-post flush-mount rack installation.
Four-Post Rack Kit Installation
This procedure provides instructions for installing a Dell PowerApp appliance in a
four-post rack cabinet. Both 24-U and 42-U racks are accommodated.
Rack Kit Contents
The rack kit includes the following items (see Figure 1-10):
•
One pair of slide assemblies
•
One cable-management arm
•
Four 10-32 x 0.5-inch pan-head Phillips screws
•
Six 10-24 x 0.375-inch pan-head Phillips screws
•
One 1-U template for a four-post rack
server tab
Rack Installation Guide
1-11