Dell PowerApp 110 Manual de instalación - Página 9
Navegue en línea o descargue pdf Manual de instalación para Servidor Dell PowerApp 110. Dell PowerApp 110 34 páginas. Rack installation guide
support.dell.com
Dell™ PowerApp™ 100 and 110
Appliances — Rack Installation
Guide
This installation guide provides instructions for trained service technicians installing
one or more Dell PowerApp 100 or 110 appliances in a rack. This guide includes
procedures for the following three rack kits:
•
Two-post center-mount
•
Two-post flush-mount
•
Four-post rack cabinet
One rack kit is required for each PowerApp appliance to be installed in the rack.
Two-Post Center-Mount Rack Kit
Installation
This procedure provides instructions for installing a Dell PowerApp appliance in a two-
post open-frame relay rack, such as those found in telecommunications equipment
facilities. Both 3-inch and 6-inch wide two-post racks are accommodated.
The two-post open-frame relay rack must be properly secured to the floor, to the
ceiling or upper wall, and where applicable, to adjacent racks, using floor and wall
fasteners and bracing specified or approved by the rack manufacturer or by industry
standards. Refer to the two-post open-frame relay rack manufacturer's installation
documentation for precautionary warnings and information before attempting this
installation.
CAUTION: Do not attempt to install the PowerApp appliance into a two-
post open-frame relay rack that has not been securely anchored in place.
Damage to the appliance and personal injury may result.
Refer to "Safety Instructions" at the front of this document for additional safety
information regarding rack installation.
Rack Installation Guide
1-1