Dell PowerEdge 2850 Manual - Página 8

Navegue en línea o descargue pdf Manual para Servidor Dell PowerEdge 2850. Dell PowerEdge 2850 44 páginas. Dell server quick reference
También para Dell PowerEdge 2850: Manual de instalación (32 páginas), Matriz de apoyo (21 páginas), Manual complementario (20 páginas), Información actualizada (24 páginas), Referencia rápida (2 páginas), Manual del usuario (30 páginas)

Figure 1-3. Installing the RAID Key

If you have a PowerEdge 1850 system, place the plastic riser card insulator over the riser card

and press down on the two plastic rivets to secure the insulator.

If you have a PowerEdge 2800 system, go to step 18.

If you have a PowerEdge 2850 system, replace the riser card.

Close the system.

Reconnect the system to its electrical outlet and turn on the system, including any attached

peripherals.

Enter the System Setup program and verify that the setting for the SCSI controller has

changed to reflect the presence of the RAID hardware.

Install and configure the RAID software. See your RAID documentation for more

information.

NOTICE:

before you can operate the RAID controller in write-back mode.

Install the bezel (if applicable).

1-6

Activating the Integrated RAID Controller

hardware key

latches (2)

The newly-installed RAID battery must be charged for 3 to 4 hours of system operation