Dell PowerEdge 4200 Series Instalación de bastidores - Página 19
Navegue en línea o descargue pdf Instalación de bastidores para Servidor Dell PowerEdge 4200 Series. Dell PowerEdge 4200 Series 34 páginas. Dell poweredge 4200 servers: installation guide
También para Dell PowerEdge 4200 Series: Manual de instalación (28 páginas), Instalación de bastidores (37 páginas)
Imprimir página
(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm
support.dell.com
2.
Remove the front door from the rack as shown in Figure 3.
a.
One person should grasp the top of the door to stabilize it. The other person
should grasp the bottom of the door.
b.
The person holding the bottom of the door should press the hinge release
lever on the bottom hinge and then pull the bottom of the door away from
the rack.
c.
The person holding the top of the door should press the hinge release lever
on the top hinge and then pull the door away from the rack.
Figure 3. Removing the 42-U Rack Doors
3.
Repeat steps 1 and 2 to remove the back door from the rack, but turn the door
handle counter-clockwise.
CAUTION: Store the two doors where they will not injure someone if the
doors accidently fall over.
DELL CONFIDENTIAL - Preliminary
9/8/00
Rack Installation Guide
hinge
release
lever
5