Dell PowerEdge 4350 Manual del usuario - Página 26

Navegue en línea o descargue pdf Manual del usuario para Servidor Dell PowerEdge 4350. Dell PowerEdge 4350 35 páginas. Dell poweredge 4350 system upgrade installation guide
También para Dell PowerEdge 4350: Instalación de bastidores (35 páginas), Manual de actualización (23 páginas), Manual de actualización (24 páginas), Manual de instalación (34 páginas)

CAUTION:

follow the Safety Instructions as described on page 7.

Replace the lamp when the message "Lamp is approaching the end of its

useful life in the operation. Replacement suggested!

www.dell.com/lamps" appears on the screen. If this problem persists after

replacing the lamp, contact Dell.

CAUTION:

working condition of your projector.

CAUTION:

attempt to replace the lamp until the projector has been allowed to

cool down for at least 30 minutes.

CAUTION:

Projector lamps are very fragile and may shatter if touched. The

shattered glass pieces are sharp and can cause injury.

CAUTION:

projector and dispose or recycle according to state, local, or federal

law. For more information see www.dell.com/hg.

Turn off the projector and disconnect the power cord.

Let the projector cool for at least 30 minutes.

Loosen the screw

that secures the

top cover, and

remove the cover.

Loosen the screw

that secures the

lamp.

Pull the lamp up by

its metal handle.

Maintenance

Before you begin any of the procedures in this section,

Use an original lamp to ensure safe and optimal

The lamp becomes very hot when in use. Do not

Do not touch the bulb or the lamp glass at any time.

If the lamp shatters, remove all broken pieces from the