Dell PowerEdge 4x00 Series Instalación de bastidores - Página 21
Navegue en línea o descargue pdf Instalación de bastidores para Servidor Dell PowerEdge 4x00 Series. Dell PowerEdge 4x00 Series 34 páginas. Rack installation guide
También para Dell PowerEdge 4x00 Series: Manual de instalación (28 páginas), Instalación de bastidores (37 páginas), Manual del usuario (42 páginas), Manual de instalación (37 páginas)
Imprimir página
(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm
support.dell.com
hinge insert
Figure 5. Removing the 24-U Rack Doors
CAUTION: Store the two doors where they will not injure someone if the
doors accidently fall over.
If you want to reverse the door so that the handle is on the other side, perform the fol-
lowing steps:
1.
With the door open, lift out and fully retract all hinge pins.
2.
Remove the hinges and door brackets from the door frame.
3.
Replace the hinges and door brackets on the opposite side and switch the posi-
tion of the handle.
4.
Replace the rack door (see the section, "Replacing the Rack Doors," found later
in this guide).
DELL CONFIDENTIAL - Preliminary
hinge pin
hinge
9/8/00
Rack Installation Guide
7