Dell PowerEdge 6950 Manual de instrucciones de instalación - Página 3
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Servidor Dell PowerEdge 6950. Dell PowerEdge 6950 21 páginas. Amd opteron 2000 and 8000 series processors installation
También para Dell PowerEdge 6950: Primeros pasos (43 páginas), Información actualizada (7 páginas), Información actualizada (21 páginas)
Imprimir página
3 Install the new processor.
4 Open the grease packet included with your processor kit and apply the thermal grease evenly to the top
of the processor.
NOTE:
To keep thermal grease from overflowing into the processor socket, use only the amount of thermal grease
needed to complete three small spirals when you perform the following step.
5 Use the enclosed applicator to apply the grease to the processor in three small, even spirals.
Figure 2. Applying Thermal Grease to the Processor
6 Replace the heat sink.
The enclosed applicator is intended for one-time use only. Dispose of the applicator after you use it
____________________
Information in this document is subject to change without notice.
© 2006 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; AMD and AMD Opteron are trademarks
of Advanced Micro Devices, Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
1
1
processor
2
applicator
2